Measure

Pouring Mixer

Application:The pouring mixer is a mixing machine fixed on top of the block mould whose function is to mix material thoroughly before pouring so that they can made into AAC blocks.

Mould

Slurry could be held in the combining of mould and side plate.After curing it would be soidified into block.The side plate could load the block which shall be cut by cutting machine and feed into autoclave to be hardened together with the trolley.
Size:4.2m,4.8m,6m

Side Plate

Use: The mould and side harden and can shut the splendid attire pour the material thick liquid, put and maintain the solidification of foaming base body quietly , the side board bears the weight of the base body and carries on cutting, one yard of shelves , steaming raising again at the same time . Is it raise car to bear the weight of base body (with side board ) is it is it keep means of delivery of cauldron to steam to pass in and out to steam
Size: 4000/4200×1200×600（mm）
4500/4800×1200×600（mm）
6000×1200×600（mm）

Curing

After pouring,use elevating chain for pushing mould in couring room.temperature is 50~70 degree in room, time is 1.5~2 hour(according to favourable geographical conditions, provide from processing).